Showing posts with label brazing equipment. Show all posts
Showing posts with label brazing equipment. Show all posts
Monday, 11 February 2013
Tuesday, 17 November 2009
The Backcock
Two pieces of brass angle 3/4" x 3/4" x 1/8"
A piece of brass strip 1/2" x 1/8" and a piece of 1/4" brass rod.
Silver soldered together and milled square.
The 1/4" square piece is riveted on by turning a spigot on the end. Cut a slit in the square rod on the milling machine.
When in position correctly clamp it down and spot through the two 2BA and two register pin holes.
A piece of brass strip 1/2" x 1/8" and a piece of 1/4" brass rod.
Silver soldered together and milled square.
The 1/4" square piece is riveted on by turning a spigot on the end. Cut a slit in the square rod on the milling machine.
When in position correctly clamp it down and spot through the two 2BA and two register pin holes.
Saturday, 31 October 2009
Subscribe to:
Posts (Atom)

