Five wheel collets are to be made to hold four wheels and the anchor. The other wheels are held by the pinions turned down to make shoulders. The center holes are 1/8" the spigot is 3/16 so we can use 3/8" rod for this procedure.
skip to main |
skip to sidebar
Making better the poorly clocks in and around the Belvoir vale.
Followers
Blog Archive
-
▼
2009
(53)
-
▼
October
(32)
- The going train
- The mounted great wheels
- The screw cut.
- Mounting the Great wheels and going train.
- Division plate and lathe mod for roller filing rest
- Not much room in this little workshop
- Brazing equipment
- Remember to leave a raised ring for low friction
- Pickling in 10% sulphuric acid
- Hold it like this
- Roller filing rest
- Ratchet click, spring and screw
- Completed barrels and great wheels
- Barrels, endplates, slipwasher and ratchet
- Barrels, end plates, slip washers and ratchets.
- Barrel arbors
- Barrel Arbors
- Wheel, collet, arbor & pinion
- collets
- pinions
- pinions
- collets
- Homemade Wheel Cutting Engine
- Cutting the teeth.
- Unfinished Wheels
- The Wheels
- The Arbors
- Arbors
- the chassis
- The Chassis
- A completed handmade, mahogany longcase clock by m...
- In the beginning
-
▼
October
(32)
No comments:
Post a Comment