Showing posts with label clock pinions. Show all posts
Showing posts with label clock pinions. Show all posts
Monday, 11 February 2013
Saturday, 31 October 2009
Thursday, 29 October 2009
pinions
Here I make pinion wire. All of my pinions are made out of 5/16" diameter stock on the milling machine. When I have cut all my leaves I can cut off a pinion one at a time at the required length, drill the hole and position on the arbor. A main advantage of fabricating instead of turning the whole arbor & pinion from solid is so that it is much easier to depth the pinions to the wheels using a simple homemade depthing tool. 3 pinions are to have 8 leaves and 4 have 7.
The 3rd and Centre pinions are 8 leaves and both are turned down to the 3/16" to hold their wheels respectively. The Scape, Fly, Warn, and Pallet are 7 leaves. And the Pin is 8 leaves. Pinions and pivots should be hardened and tempered to prevent wear.
The 3rd and Centre pinions are 8 leaves and both are turned down to the 3/16" to hold their wheels respectively. The Scape, Fly, Warn, and Pallet are 7 leaves. And the Pin is 8 leaves. Pinions and pivots should be hardened and tempered to prevent wear.
Subscribe to:
Posts (Atom)

